Our Sink Products are made by AISI 304 ( Food Grade ), more safe and very easy to clean. We have been joined in sink product design and manufacturing many years, not all the sink products are exactly the same, detail design is very important, especially the double bowl sink products, actually it is made by a drawing die or named a stamping die as well. Ceeto company has professional tooling engineers who are capable of design and manufacture this sink drawing die, they are skilled engineers with many years experience. The most complicated technology is not to make this sink drawing die, the critical technology is how to make the sink product well in good quality during drawing die mold tryout processing, much more attention will be paid during drawing die working process when hydraulic press maching is working, they are almost the same steps.
- Measures of the kitchen sink: 44.5 x 83 cm
- Thickness: 0.80
- Measurements of bowl: Ø 355x170
- Measures of the cabinet: 80 cm
- Position of drainer: Reversible
- Material: Stainless Steel
- Stamping die making time 30 days
- Sink product finishing time 5 working days
- 5 years guarantee
Good stainless steel sinks all use relatively thick plates. Because Kitchen Sink Inset Round has been treated at the edge, it is difficult to see the thickness at once. The simplest way is to press the surface of the sink slightly hard. If it can be pressed, the material is very thin. Of course, if you can borrow a Vernier caliper and a spiral micrometer, don't bother.
Technical Processing to Make Kitchen Sink With Drainer Single Bowl Product
- Machine: generally using a large tonnage hydraulic press (1200t) to draw the sheet metal die
- Die: the angle can not be too straight, generally more than φ 10 directly, the structure should be reasonable
- Material: generally require plate thickness range within 0.8-1.0mm, beyond this range, even 500t hydraulic press is powerless
- Heat treatment: the whole drawing tank generally needs high temperature annealing treatment, generally 1200 degrees above the temperature, to eliminate the internal stress after drawing
- Surface treatment: satin, polishing, polishing (usually smooth)
- Process: after the sheet metal is added to the drawing oil of the die, it can be drawn smoothly, annealed after forming, and then treated with surface treatment
- Welding should be correct, polished surface texture should be uniform, no obvious scratches, hammers and burn marks
- The welding position of the flume should be firm, the welds should be uniform, and there should be no defects such as incomplete penetration and cracks. The exposed welds should be polished or decolorized.
- The edge of the sink should be smooth and not to have sharp corners and burrs
With the development of the whole economy of our country, the living standard of the people has been generally improved. The Stainless Steel Inset Round Double Sink have become the kitchen utensils in our memory. We hope that you may choose us as your supplier to get good quality of Stainless Steel Inset Round Double Sink. If you have any questions, please don't hesitate to let us know, we shall be very glad to give you feedback at the first time. Thank you very much!
Tips: For your information, we have the other kinds of Stainless Steel Sink Products available in our website.
Looking for ideal Stainless Steel Inset Kitchen Sinks Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Stainless Steel Kitchen Double Sinks are quality guaranteed. We are China Origin Factory of Stainless Steel Kitchen Double Round Sinks. If you have any question, please feel free to contact us.
Product Categories : Stamping Mould > Household and Commercial Kitchens Stamping Mould