Zhejiang Ceeto Molding Technology Co.,Ltd.
Model No.: CT-10264
Shaping Mode: Injection Mould
Surface Finish Process: Polishing
Mould Cavity: Multi Cavity
Process Combination Type: Single-Process Mode
Runner: Hot Runner
Design Software: UG
Certification: ISO, SGS
Packaging: Wooden box
Productivity: 1000000shots mould life
Place of Origin: China
Supply Ability: 20000sets/month
Certificate: USP class and ISO
HS Code: 8480790090
The disposable syringe is a disposable syringe, which is made of polymer polypropylene material and is divided into three-piece type and two-piece type. The three-piece structure is the core rod, the rubber plug, the jacket three pieces and the injection needle, and the outer packing is composed of the two-piece structure is the core rod. Jacket and injection needle, outer packing composition.
Scope of application:
Disposable Medical Plastic Syringe mould is made of high quality steel, and it is suitable for pumping liquid or injection. This product is only suitable for subcutaneous or intramuscular injection and intravenous blood tests or cosmetic, used by medical personnel, prohibited for other purposes and non-medical personnel.
Basic information for Disposable medical syringe:
Injection material: medical grade PP
Volume: 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml, 100ml
Needle material: stainless steel
Shelf life: 5 years
Standard needle size:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
Q1: How do you control quality of Disposable syringe mould quality?
A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.
Q2: What are the MOQ and leading time?
A: 200000pcs each type; leading time is within 35 days or based on your quantity;
Q3: What are the terms of payment?
A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C are acceptable.
Q4: How to keep us away from risk?
A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.